Dimension Engineering was founded in 2004 by two Carnegie Mellon University graduates. We aim to sell easy to use electronic and electro-mechanical products to the hobbyist, educational and research markets. Our products are always competitively priced without compromising on quality. All of Dimension Engineering's products are designed, assembled, tested and packaged by us.
We do this full time, and have a substantial investment in SMT manufacturing equipment. We are based in Hudson, Ohio but we hope to be taking over the rest of the world pretty soon.
We do this full time, and have a substantial investment in SMT manufacturing equipment. We are based in Hudson, Ohio but we hope to be taking over the rest of the world pretty soon.
Services
The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market.
It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics.
Out of the box, the SyRen 10 can supply a single DC brushed motor with up to 10A continuously.
Peak currents of 15A are achievable for a few seconds.
Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.
It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics.
Out of the box, the SyRen 10 can supply a single DC brushed motor with up to 10A continuously.
Peak currents of 15A are achievable for a few seconds.
Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.
Sabertooth 2X5 is the motor driver of choice for small differential-drive robots.
It is ideal for smaller robots- up to 3lbs in combat or 25 lbs for general purpose use.
It is also a great choice in any application where you need to control two brushed motors.
Out of the box, the Sabertooth can supply two DC brushed motors with up to 5A each continuously.
Peak currents of 10A are achievable for short periods.
Because Sabertooth 2x5 incorporates soft current limiting and thermal protection, you need not worry about killing the driver with accidental stalls or by hooking up too big a motor.
It is ideal for smaller robots- up to 3lbs in combat or 25 lbs for general purpose use.
It is also a great choice in any application where you need to control two brushed motors.
Out of the box, the Sabertooth can supply two DC brushed motors with up to 5A each continuously.
Peak currents of 10A are achievable for short periods.
Because Sabertooth 2x5 incorporates soft current limiting and thermal protection, you need not worry about killing the driver with accidental stalls or by hooking up too big a motor.
Sabertooth 2X5 R/C is a dual motor driver specifically optimized for use in radio controlled vehicles.
It is suitable for small robots, cars and boats, and especially well suited for the Antweight and Beetleweight classes of fighting robots.
Out of the box, it can supply two DC brushed motors with up to 5A each.
Peak currents of 10A are achievable for a few seconds.
Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.
It is suitable for small robots, cars and boats, and especially well suited for the Antweight and Beetleweight classes of fighting robots.
Out of the box, it can supply two DC brushed motors with up to 5A each.
Peak currents of 10A are achievable for a few seconds.
Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.
BattleSwitch is the larger, 10A version of our popular PicoSwitch.
BattleSwitch is a relay switch that you toggle via hobby radio control gear.
You can use BattleSwitch to quickly and easily control glow plugs, BattleBot weaponry and more.
You can activate applications with voltage levels as high as 240VAC without having to know anything about microcontroller logic levels or transistors because the relay offers full electrical isolation from your receiver electronics.
BattleSwitch plugs into a standard hobby radio control receiver as easily as a servo does.
BattleSwitch is a relay switch that you toggle via hobby radio control gear.
You can use BattleSwitch to quickly and easily control glow plugs, BattleBot weaponry and more.
You can activate applications with voltage levels as high as 240VAC without having to know anything about microcontroller logic levels or transistors because the relay offers full electrical isolation from your receiver electronics.
BattleSwitch plugs into a standard hobby radio control receiver as easily as a servo does.
CellShield is a low voltage cutoff device which provides cell-by-cell protection for lithium battery packs.
By monitoring each cell individually, CellShield prevents individual cell overdischarge due to pack imbalance or cell variations.
CellShield provides a soft cutoff when the lowest voltage cell of the pack reaches the set minimum voltage.
The minimum voltage is adjustable from 2.5v/cell to 3.5v/cell.
This lets you set the proper cutoff voltage for your specific pack.
For example, 8-10C cells typically use a 3.0v/cell cutoff, while 20C cells work better with a 3.2v/cell cutoff.
By monitoring each cell individually, CellShield prevents individual cell overdischarge due to pack imbalance or cell variations.
CellShield provides a soft cutoff when the lowest voltage cell of the pack reaches the set minimum voltage.
The minimum voltage is adjustable from 2.5v/cell to 3.5v/cell.
This lets you set the proper cutoff voltage for your specific pack.
For example, 8-10C cells typically use a 3.0v/cell cutoff, while 20C cells work better with a 3.2v/cell cutoff.
Reviews
Be the first to review Dimension Engineering.
Write a Review
